This Item Has Been Added to Your Quote. To view your quote you will need to log-in or register for an account.

Scissor Lift - GS-1930 - Genie Industries

Rental Rates
Daily:$140.00Weekly:$425.00Min. Rent Amount:$140.00Min. Rent Term:24 Hrs
Request this item
Quantity:
Add to Quote

 

If unit is rented for paint work, unit must be returned clean to avoid extra charges.

  • Designed for interior slab on grade use only (such as a warehouse).
  • This personnel lift is designed for flat interior surfaces with a slope of NO MORE THAN 1.5 degrees side to side (1/4 inch per foot of slope) or 3 degrees front to back (1/2 inch per foot of slope).
  • The solid steel deck platform has a slip-resistant surface.
  • Heavy duty tubular steel guardrails maximize durability. Telescopic end rail can be raised to accommodate large loads.
  • Lubrication-free, service-free pivot points.
  • Built-in lanyard attachment points.
  • The ergonomic Joystick Controller operates from the platform or the ground.
  • Low noise level allows operation in quiet work environments.
  • High angle steering provides excellent maneuverability.
  • Swing-out battery box and power module allow easy access to componentry.
  • Variable speed motor extends battery and motor life by using only the energy needed to do the required work. On-board troubleshooting diagnostics notify the operators of possible fault conditions.


Click here to view a video of this product in action.


Standard Features

  • 25 ft (7.8 m) working height
  • 39 in (1 m) roll-out platform extension
  • Compact 30 in (76 cm) width
  • 500 lb (227 kg) lift capacity
  • Compact design
  • Automatic 25 amp battery charger
  • Proportional controls for lift and drive functions
  • Multiple disc brakes provide smooth deceleration
  • Drive speed interlock limits speed while elevated
  • Emergency stop at both platform and ground controls
  • Manual platform lowering valve
  • Manual brake release
  • Pothole guards
  • Non-marking tires
  • AC wiring to platform
  • Tilt level sensor with an audible alarm
  • Beeper horn
  • Hour meter



Standards Compliance

 

  • ANSI/SIA A92.6
  • CSA CAN3-B354.2-M82
  • CE compliance option
  • AS 1418.10